Sony WEGA KDE-50XS955, KDE-37XS955, KDE-42XS955 Operating Instructions Manual page 35

VIDEO IN
R-AUDIO -L
VIDEO
( MONO )
A/V cable
Notes on Using This Connection
To Do This ...
Watch cable (unscrambled)
channels
Watch cable box (scrambled)
channels
Watch the VCR
Set up the remote control to
operate the cable box or VCR
Activate the remote control to
operate the cable box or VCR
Control specific cable box and
VCR functions with the remote
control
Label video inputs to easily
identify equipment connected to
the TV
Rear of TV
1
3
S VIDEO
VCR
A/V cable
Do This ...
TV/VIDEO
Press repeatedly to select the cable input (CABLE in the illustration).
Turn on the VCR and tune it to the channel the cable box is set to (usually channel 3
TV/VIDEO
or 4). Press
illustration). Use the cable box to change channels.
TV/VIDEO
Press repeatedly to select the VCR input (VIDEO 1 in the illustration).
If you have a non-Sony VCR, you must program the remote control. See
"Programming the Remote Control" on page 58.
For the cable box, press
DVD/VCR (FUNCTION).
See "Operating a Cable Box" on page 60 and "Operating a VCR" on page 61.
See the instructions for setting up Video Labels on page 105.
Do not leave the display indication of the cable box and VCR
turned on.
75-ohm coaxial cable
Coaxial cable
Cable Box
CATV cable
repeatedly to select the VCR input (VIDEO 1 in the
SAT/CABLE (FUNCTION). For the VCR, press
VHF/UHF CABLE
Coaxial
cable
Coaxial
cable
Splitter
33