Setting Up The Channel List; Using Auto Setup - Sony WEGA KDE-50XS955, KDE-37XS955, KDE-42XS955 Operating Instructions Manual

Setting Up the Channel List

Using Auto Setup

After you finish connecting your TV, you need to run Initial Setup, which
automatically sets up available analog and digital channels. The Initial Setup
screen appears when you turn on your TV for the first time after hooking it
up. If you do not want to set up the channels at this time, you can do it later
by selecting the Auto Program option in the Channel menu (see page 99).
The Auto Program feature does not apply for installations that
use a cable box for all channel selection.
To run Initial Setup the first time you turn on your TV
1
Press to turn on the TV.
POWER
The Initial Setup screen appears.
2
V v
Press or to select the on-screen display language. Then press
The message "Start auto program now?" appears.
3
V v
Press or to select "Yes", then press
Auto Program automatically creates a list of receivable channels. When
finished, the lowest numbered channel is displayed.
To run Auto Program again at a later time
s
Use the Auto Program feature as described on page 99.
To add individual digital channels
s
Use the Digital Channels feature as described on page 99.
Auto Program may take up to 50 minutes or more to complete.
A progress bar is displayed while the channel list is being
created.
.
53
.