Satellite Receiver - Sony WEGA KDE-50XS955, KDE-37XS955, KDE-42XS955 Operating Instructions Manual

Satellite Receiver

Rear of TV
VIDEO IN
R-AUDIO -L
VIDEO
( MONO )
36
To connect a satellite receiver
1
Connect the satellite antenna cable to the satellite receiver's satellite
input jack.
2
Use an A/V cable to connect the satellite receiver's A/V output jacks to
the TV's A/V input jacks (VIDEO 1 or 3).
3
Connect the 75-ohm coaxial cable (not supplied) from your cable or
antenna to the TV's CABLE or VHF/UHF input jack.
4
Run the Auto Setup program, as described in "Setting Up the Channel
List" on page 53.
Using S VIDEO jacks? See page 29.
1
3
S VIDEO S VIDEO
Satellite Receiver
A/V cable
VHF/UHF CABLE
Satellite
antenna
cable
75-ohm CATV
coaxial cable
cable