Kurzweil X-Pro Series Getting Started Manual page 20

Operation Overview
Differences Between The X-Pro And The PC3
Pushing the Pitch-Mod Controller to the right sets a fixed continuous controller value. When
you release the Pitch-Mod Controller from the right, the highest value that was reached remains
set. Once the value is set, push the Pitch-Mod Controller left of center and release to set the
controller value back to its lowest value. Set values are remembered when moving between
programs.
Pushing the Pitch-Mod Controller to the left allows you to continuously set the controller value,
and releasing the Pitch-Mod Controller from the right sets the controller value back to its lowest
value.
SW And ARP Buttons
The X-Pro has its SW and ARP buttons above the Main Volume fader, as opposed to the PC3's
SW and ARP buttons, which are positioned to the left of the keyboard. These buttons function
the same as with the PC3.
xD Memory Card Slot And USB Port
The X-Pro has its xD Memory Card Slot and USB port on the front panel, to the right of the
alphanumeric pad, as opposed to the PC3, which has its xD Memory Card Slot and USB port on
the back of the instrument. These function the same as with the PC3.
Contrast And Brightness Knobs
These function just as on the PC3, but on the X-Pro they are located on the front panel to the
right of the display, as opposed to the PC3 where they are located on the rear panel.
Analog Audio Outputs And Inputs
The X-Pro's Pro Audio Balanced Outputs Left and Right on the back of the unit correspond to
the PC3's Balanced Analog Outputs Left and Right. Unlike the PC3, the X-Pro does not have
Balanced Analog Outputs Aux Left and Right.
Also unlike the PC3, the X-Pro has Consumer Audio L/R In and Out connections. Use the X-
Pro's Audio Balanced Outputs Left and Right when connecting the X-Pro to a mixing board or
PA system. Use the Consumer Audio L/R outputs when connecting the X-Pro to a home stereo
system or other consumer audio product. Unlike the PC3, the X-Pro also has Consumer Audio
L/R In connections. With the appropriate cables you can connect a CD player, MP3 player, or
other consumer audio device to use the X-Pro's internal speakers. This is useful to play along
with a song, backing track, or instructional recording. Adjust the volume on your device to
balance the volume between the X-Pro and your device.
Headphones Output
The X-Pro has two headphones outputs, located underneath the keyboard on the left. This is
unlike the PC3, which has one headphones output on the rear panel.
EP1 And EP2 Inputs
The X-Pro's EP1 and EP2 inputs on the rear of the unit correspond to the PC3's CC Pedals 1
(volume) and 2 (wah) inputs. These function the same as with the PC3.
2-12