Kurzweil X-Pro Series Getting Started Manual page 34

Setup Mode
Using Setup Mode To Play Layers Of Instruments
5.
6.
Now playing the upper half of the keyboard will produce piano and strings. See The Setup
Editor above for details on saving these changes when you exit the Setup Editor.
Alternatively you can create a layer by adjusting the key range of existing zones to match
another zone. You can also create a partial layer by adjusting a zone's key range to only coincide
with some of another zone's key range. There are many advanced uses of Setup mode to
manipulate layered zones. You can make a zone only respond to certain velocity ranges, so that
for example a layered zone is only heard when playing loudly. You can also mute and unmute a
layered zone with a programmable switch or footswitch, or adjust the volume of a layered zone
with a slider or expression pedal. See the PC3 Musician's Guide, Setup Mode Chapter for details.
4-8
Use the more soft button on the bottom left of the display to scroll to the next page of soft buttons
and find the DupZn (duplicate zone) button. Press the DupZn button to duplicate zone 2 and create
zone 3. You will see the message "Zone duplicated," and you will be brought to the CH/PROG page
for zone 3 (see below.)
On the CH/PROG page for zone 3, select the Program field. Select the program 198 Studio
Strings by entering 198 on the alpha numeric pad and pressing the Enter button on front panel (see
below.)