Bank Buttons - Kurzweil X-Pro Series Getting Started Manual

Bank Buttons

The Bank buttons, situated in the top left corner of the X-Pro's front panel, let you choose
different banks of programs (e.g., KB3 programs or Classic Keys programs). Within each bank,
you can use the Program and Category buttons (to the right of the display) to select individual
programs.
The Bank buttons have special functions in KB3 mode, indicated by labels beneath each button.
Sliders
In KB3 mode, the X-Pro's nine sliders emulate an organ's drawbars. For example, slider A
emulates an organ's 16' drawbar. In other modes, the sliders can be used to send values for
different MIDI controllers. In either case, you may have to move the slider past the current value
for its selected function before slider movement will have any effect.
Most VAST programs use the sliders for these functions:
A Data
B MIDI 13
C MIDI 22
D MIDI 23
E MIDI 24
F MIDI 25
G MIDI 26
H MIDI 27
I MIDI 28
Filter frequency, Brightness
Filter resonance, Tremolo rate control
Layer volume, Envelope control, Lo tonal balance
Layer volume, Envelope control, Hi tonal balance
Layer volume for thumps and release
Effects control 1
Effects distortion drive
Effects distortion warmth
Reverb / delay control
Operation Overview
User Interface Basics
2-3