Part 5: Fixing Mistakes - Kurzweil X-Pro Series Getting Started Manual

Song Mode
4.

Part 5: Fixing Mistakes

For each track in Song mode, you can fix mistakes in your performance without re-recording the
entire performance. Here we will describe the method that is easiest for fixing specific passages
in a track. (See the PC3 Musician's Guide: Song mode chapter: The Event Page for a way to fix single
notes.)
1.
2.
3.
5-8
Save soft button on the SongMode:save as page in order to replace the currently saved song with
your new version.
Repeat the steps above with different track and program numbers to add additional instrument parts
to your song.
On the Song mode MAIN page, use the Chan/Layer buttons (to the left of the display) to Set
the RecTrk parameter to the track that you want to fix. For example, let's fix track 1 (see
below.)
Set the Mode parameter to Erase (see below.) This causes previously recorded notes to be erased
when a track is being recorded into.
Press the BIG soft button to go to the Big Time page.