Tripp Lite B127F-1A1-MM-HH Owner's Manual page 5

Standard Extender Kit Installation
B127F-1A1-MM-HH
Extender Kit
Make sure all equipment in the installation is powered OFF.
1
Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or
2
P568-XXX-2A Series cables), connect the HDMI source to the INPUT
port on the local transmitter unit.
(Optional) Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT
3
or P568-XXX-2A Series cables), connect a local monitor to the
LOCAL port on the local transmitter unit. The LOCAL (orange) LED will
illuminate to indicate the port is connected to a display.
Using duplex LC multimode (850 nm) fiber cable (such as Tripp Lite
4
N520-XXM Series cable), connect the LC fiber port on the local
transmitter unit to the LC fiber port on the remote receiver unit.
-03-230-933974.indb 5
PC with USB
(Keyboard + Mouse)
Control
IR Source
Sensor Remote
LOCAL
DVD/BD
Player
1 Up to 1000 ft. multimode fiber cable
2 Up to 15 ft. HDMI 2.0 cable at 4K/60 Hz
USB
Keyboard Mouse
REMOTE
RECEIVER
LOCAL
TRANSMITTER
5
USB RS-232
Scanner/optional
IR Source
Sensor Remote
5/3/2019 9:37:21 AM