What To Do If; Installation - Zanussi ZOB482 User Manual

Replacing the oven light bulb/cleaning the glass
cover
1. Turn the glass cover anti-clockwise to remove it.

What to do if...

Problem
The oven does not heat up
The oven does not heat up
The oven does not heat up
The oven does not heat up
The oven lamp does not operate
Steam and condensation settle on the
food and in the oven cavity
The display shows "12.00" and
"LED"
If you can not find a solution to the problem, refer to your
dealer or the Service Force Centre.
These data are necessary to help you quickly and
correctly. These data are available on the rating plate (refer
to "Product description")
• Model description ............
• Product number (PNC) ............
• Serial number (S.N.) ............
Warning! Let a qualified electrician or competent
person do repairs to the appliance.

Installation

Building In
Warning! Only a qualified and competent person
must do the installation of the appliance. If you do
not contact qualified or competent person, the guarantee
becomes invalid if there is damage.
• Before you install the built-in appliance to the kitchen
cabinet make sure that the recess dimensions are suit-
able.
2. Clean the glass cover.
3. Replace the oven light bulb with applicable 300°C
4. Install the glass cover.
Possible cause
The oven is not switched on
The clock is not set
The necessary settings are not set
The fuse in the fuse box is released
The oven lamp is defective
You left the dish in the oven for too
long
A power cut
Important! If you do not operate the appliance correctly,
the visit from the Service Force Centre or dealer will not
be free of charge, even during the warranty period.
baking or roasting procedure, steam can show on the
glass.
• Make sure that there is anti-shock protection for the
• According to the regulations of force, all parts which
• Some parts of the oven carry current. Close the appli-
heat-resistant oven light bulb.
Switch on the oven
Set the clock
Control the settings
Control the fuse. If the fuse is re-
leased more than one time, refer to a
qualified electrician.
Replace the oven lamp
Do not leave the dishes in the oven
for longer than 15-20 minutes after
the cooking process ends
Reset the clock
Hints for appliances with metal fronts:
If you open the door during or immediately after the
installation.
ensure the anti-shock protection must be fixed in such
a way that they cannot be undone without tools.
ance with furniture and make sure there are no free
spaces. It prevents electric shock because you cannot
accidentally touch dangerous parts.
Remedy
61