Table of Contents
Advertisement
Figure 3-23 - Utilities Specific to Your Operating System
6. Download the executable utility, "Device Discovery Utility for Windows" by right-clicking on
the link in the list and selecting "Save Target As ..."
In the file box, browse to or create a directory in which to save the utility and note that
location for future use. (No installation is necessary, so no Start Menu item or Desktop
icon is created. To run it, you will need to browse to the location of the file and double
click on it.)
After downloading, the utility is ready to use.
3.12
Erasing the Existing Configuration File
21B
If the file system on the SEC is not working, you may wish to completely erase the
configuration file (niacfg.ini) from the embedded file system using the following procedure.
1. Make sure you have a known-good or factory-default-settings configuration file on hand to
upload after deleting the existing configuration file or rebooting the SEC. See Section
for information on downloading an existing configuration file or Section
the factory-default-settings configuration file. The factory niacfg.ini file is on the CD that
was shipped with the unit.
Copyright 2019
Microlok II
SM6800O Rev. 1, March 2019
®
Serial-to-Ethernet Converter (SEC)
3.9
X
X
3.8
X
X
for a listing of
3-21
Hide quick links:
Advertisement
Table of Contents
