Figure 3-17 - Back Button In Web Browser On Flash0/Directory Page; Figure 3-18 - Advanced Tools Page - Hitachi Microlok II Installation, Operation And Troubleshooting Manual

Figure 3-17 - Back Button in Web Browser on FLASH0/Directory Page

9. Reset the SEC by clicking on the Reboot Digi button (
the electronic device in the SEC which stores the configuration files and includes the
Ethernet connection, the Digi EPROM chip, and two LED indicators as shown in
3-19 .)
X
10. The green LED on the Ethernet connection on the front of the SEC will come on while it is
booting. When it has booted up, the green LED will go out, and the yellow Ethernet LED
will turn off for a brief moment. A few seconds after the yellow LED comes on again, the
SEC is fully running.
Copyright 2019

Figure 3-18 - Advanced Tools Page

SM6800O Rev. 1, March 2019
®
Microlok II Serial-to-Ethernet Converter (SEC)
Figure 3-18
X
.) (Digi is the name of
X
Figure
X
3-16