17Bconfiguring The Sec; Figure 3-12 - Sec Configuration Home Page; Gateway - Hitachi Microlok II Installation, Operation And Troubleshooting Manual

2. Enter advanced
the SEC configuration page (
In addition to a link to the Advanced Tools page, the SEC configuration page displays the part
number and software version of the SEC, the MAC address, IP address, Subnet Mask, and
Gateway address. The Mode is also displayed. Currently, only Peer Routing Mode is
supported.
For information on configuring the SEC using the Advanced Tools page, see Section
3.8 Configuring the SEC
17B
All of the SEC configuration settings are maintained in the niacfg.ini file that resides in memory
in the SEC. Configuring the SEC involves making changes to the niacfg.ini file.
The following procedure takes you through the process of making changes to the niacfg.ini file.
Using this procedure, you will:
• Access the file residing on the SEC with Internet Explorer
• Download the file to your local PC
• Edit the file using a text editor
• Upload the edited file to the SEC memory
• Reboot the SEC
Copyright 2019
or the user name, and objctl for the password. The system will display
f
Figure 3-12
X

Figure 3-12 - SEC Configuration Home Page

SM6800O Rev. 1, March 2019
®
Microlok II Serial-to-Ethernet Converter (SEC)
).
X
3.8 .
X X
3-12