ATCOM D2X User Manual page 32

D2X IP Phone User Manual
Busy Forward
It means the phone is busy once the phone is not at standby mode. Setup this feature as
below:
Item
Busy
Press the key
softkey"Switch"to setup
The Number key, "*"key,
Forward to
and "#"are permitted to
be input.
The Number key, "*"key,
On Code
and "#"are permitted to
be input.
The Number key, "*"key,
Off Code
and "#"are permitted to
be input.
No Answer Forward
All incoming calls will be forwarded after time out, once the feature of "No Answer Forward" is
activated. Setup this feature as below, and please move the navigation key to check more:
ATCOM TECHNOLOGY CO., LIMITE
Operation
.
32
www.atcom.cn
forward directly
Switch on or Switch off the feature.
"Enable"mean this feature is enabled，
or
"Disable"mean this feature is disabled.
Setup the target phone number which all
incoming calls transferred to
The feature code to enable busy calls
forward, the phone will send the feature
code directly to open busy call forward
The feature code to disable busy calls
forward, the phone will send the feature
code directly to close busy call forward
Description