Table of Contents
Advertisement
The Language Syntax
Segment Import and Export Language
Name Construct
The Name construct specifies a name for the segment:
<SEG_NAME>
:name:
where <SEG_NAME> is an ASCII string representing the segment
name. The segment name must begin with a letter, which may be
followed by an alphanumeric string. Underscores are allowed,
whitespaces are not.
Options
The Options syntax is defined in the following diagram:
<StateSet construct>
<StatePar construct>
<Base construct>
<Vector Width construct>
Options defined within a vector variable scope remain valid for the
duration of the vector variable construct. However, options may also
be specified within a segment construct in which case they are valid
only for the duration of the segment construct. As soon as the segment
construct goes out of scope the options valid at the vector variable
scope re-apply (see "Scopes" on page 328 for a more detailed
definition of scopes).
323
Agilent 81250 Parallel Bit Error Ratio Tester, Programming Reference, March 2006
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
