Smartbox GridPad 8 Manual page 57

In Grid 3 highlight your newly named button and select Transmit
A. On your EasyWave socket, press the button three times.
This will return the device to operating mode. You can now tap
Transmit A to toggle the switch on and Transmit B to switch it off.
Adding the paired socket to an accessory
Once your socket has been paired, you can assign it to an
accessory and use it in the Servus Environment Control grid sets.
In Settings – Environment control, tap Add under the Accessories
heading.
From the Add accessory window select Socket and select Next.
You can now give the accessory a name.
This is useful if you are using more than one accessory of the
same type at the same time. In this example, the socket is
controlling a desk fan.
57