Setting Up A Radio Frequency Device - Smartbox GridPad 8 Manual

Setting up a radio frequency
5.4
device
To use an EasyWave or Z-Wave radio frequency device, you must
first pair it with your Grid Pad, then configure how it behaves. In
the following example we are using an EasyWave socket, however
the same instructions apply for Z-Wave devices.
Pairing an EasyWave socket
Go to Settings – Environment control and select Transmitters.
Highlight EasyWave and tap Configure.
You will need to assign a button to the socket. Select one of the
buttons from the menu and click Rename. This will be helpful if you
are going to be using more than one socket. Give the button a
recognizable name and tap enter.
Plug your EasyWave socket into a power outlet and press the
button once to enter training mode. The LED will flash in a steady
pattern.
56