SB18 Classroom Tablet Contents Warranty Basic Description General care SB18 Overview Batteries and Power Mounting the SB18 Access and environment control Contact details Please read this guide before using the machine This booklet does not replace the full manual for either the computer or the software, but gives a quick guide to the things you should know to get the best from your system.
Avoid hard knocks and dropping. The machines are sufficiently robust for normal use, but are not designed to be stood on or dropped from a height. Repairs Do not attempt to open the SB18, as there are no user serviceable parts inside.
Connecting the Power Cable to the Computer 1. Connect the power adapter to the computer as shown in the diagram above. 2. Connect the power adapter to an electrical socket until the computer is fully charged. The battery charge light on the right side of the computer will turn off once the battery is fully charged.
Mounting the SB18 The SB18 Classroom Tablet is fitted with a mounting plate, designed to work with Daessy and REHAdapt mounting systems. Mounting Safety It is important to make sure you mount the device safely. Failure to do so could cause damage to the device or injury to the user. Please read the safety information that will come with the mounting equipment you use.
Radio Control The SB18 also contains a radio receiver that can be used to control a range of accessories supplied by Smartbox. These include mains sockets and alarms. Please refer to the Servus Manual for more details on setting up environment control.
Need More Help? You can find many helpful hints for The Grid 2 on our Website www.smartboxat.com Or you can contact our friendly support team: support@smartboxat.com +44(0)1684 578 Smart House 4a Court Road Malvern Worcestershire WR14 3BL, UK Tel: +44(0)1684 578868 Fax: +44(0)1684 897753 Email: info@smartboxat.com...
Need help?
Do you have a question about the SB18 and is the answer not in the manual?
Questions and answers