Incoming Character Processing - Fluke 5520A Programmer's Manual

Command Syntax (cont)
Units Accepted in Parameters and
Responses (cont)
Units
NS
US
MS
S
PSI
MHG
INHG
INH2O
FTH2O
MH2O
BAR
PAL
G/CM2
INH2O60F

Incoming Character Processing

1. The most significant data bit (DIO8) is ignored.
2. All data is taken as 7-bit ASCII.
3. Lower-or upper-case characters.
4. ASCII characters less than 32 (Space) are
discarded, except for characters 10 (LF) and
13 (CR), and in the *PUD command argument.
Meaning
Period in nanoseconds
Period in microseconds
Period in milliseconds
Period in seconds
Pressure in pound-force per square
inch
Pressure in meters of mercury
Pressure in inches of mercury
Pressure in inches of water
Pressure in feet of water
Pressure in meters of water
Pressure in bar
Pressure in pascal
Pressure in grams per centimeter
squared
Pressure in inches of water at 60
degrees Fahrenheit
6