Setup And Utility Commands - Fluke 5520A Programmer's Manual

Command Summary (cont)

Setup and Utility Commands

CLOCK
CLOCK?
DBMZ_D
DBMZ_D?
ERR_UNIT
ERR_UNIT?
FORMAT
LIMIT
LIMIT?
ONTIME?
PRES_UNIT_D
PRES_UNIT_D?
REFCLOCK_D
Sets the real-time clock.
Queries the real-time clock.
Sets the power-up and reset
default impedance used for
dBm outputs (ac volts).
Returns the power-up and
reset default impedance used
for dBm outputs (ac volts).
Sets the UUT error display unit
or ppm/% change threshold.
Returns the selected UUT
error display unit or change
threshold.
Use with extreme care.
Restores the contents of the
nonvolatile memory device to
factory defaults.
Sets maximum output
magnitudes.
Returns maximum output
magnitudes.
Returns time since last
powered up.
Sets power-up and reset
default pressure display units.
Returns power-up and reset
default pressure display units.
Sets the power-up and reset
default for the reference clock
source (internal or through the
10 MHz IN BNC connector).
22