Device manual
2.8
Setting configuration points
W. Bälz & Sohn GmbH & Co.
1 Select configuration point
2a Set new value by change in individual steps and...
respectively
2b Set new value by continuous change
with increasing speed and...
3
...confirm new value within 5s, otherwise the previous, still effective value
will be set again automatically.
4
After the new value has been confirmed by pressing
call up the next configuration point
Back to operating level, possible at any time
Koepffstraße 5
D-74076 Heilbronn
6490B / 6490B-y / 6590B
Telefon (07131) 1500-0
Page 9
, press
again to
Telefax (07131) 1500-21