Spare Parts - Nederman ATEX Series Instruction Manual

EN A, A EX 2GD, A EX 3GD - Vacuum Cleaners
Items to inspect
Silencer material
Float ball
Ejector nozzle
Wear plate, silo
Wear plate, grit and dust separator
VACUUM ON
If specified vacuum is not reached
Abnormal noise level.
6.12

Spare parts

CAUTION!
Use only Nederman original spare parts and accessories.
For spare parts, see the attached Spare Parts manual.
Contact your nearest authorized distributor or Nederman for advice on technical service or
if you require help with spare parts. See also www.nederman.com.
Ordering spare parts
When ordering spare parts always state the following:
• Part number and control number (see the product identification plate).
• Detail number and name of the spare part (see www.nederman.com).
• Quantity of the parts required.
32
What to look for
Damaged silencing material.
Dirty float ball.
Dirty ejector nozzle.
Damaged or frayed rubber pad on the wear plate.
See Section 9, Troubleshooting.
Risk of equipment damage.
Service
Replace.
Clean the float ball at least once a month.
Clean.
Replace.