Nespresso Citiz Service Manual page 79

• If present, disconnect ground wire (15, part of thermoblock assembly).
• If the thermoblock or core unit has to be replaced, disconnect milk frother connector
(57). Otherwise the core unit can be removed together with this connector (see page
73).
• Remove water tank connector (53, see page 71).
Assembly checkpoints
• All covers are assembled on the core unit.
• Check that wiring between core unit and platform is led through cable fixation (71).
• Use marked cable guides to lay wires.
• Check wiring of milk frother connector (57), see detail.
• Check wiring of mains switch (54), see "Wiring diagrams ­ model Citiz & milk,
EF 485/486" on page 124 and following.
• During assembly of the water tank connector (53) on the platform, each of its 3
latches has to engage with an audible click.
R E P A I R S
Citiz service manual
The flat receptacle on
the ground wire has a
special connector
latching (see detail). Press
down lever at first, then pull
off receptacle.
79