8.4.2 Replacing water tank connector
•
Pull off both hoses from water tank connector (53).
•
Release the 3 latches around the water tank connector one after the other by
pressing the top of their hooks outwards with a screwdriver (see detail) and lifting
the water tank connector at the same time.
•
Remove gasket (a) from water tank connector (53).
•
With the help of a pair of tweezers, remove clamping ring (b) and metal sieve (c).
•
Clean or replace parts.
R E P A I R S
Citiz service manual
The water tank con
nector (53) is
replaced together
with gasket, clamping ring
and metal sieve.
59