Wiring Diagramm - AVT MAGIC AE1 DAB+ Go Hardware Manual

3.5

Wiring diagramm

The following figures show the system in the different operating modes and
their respective cablings.
ATTENTION Earthing
The system must be earthed via earthing screw for EMC reasons. If the earth-
!
ing is not carried out, the Audio signal can be faulty (humming).
The minimal wiring for the operation is pictured in Fig. 4.
FIG. 4
Earthing!
Power supply
interface
A PC with a
Windows PC Software
The maximum wiring with all options is shown in Fig. 5. The LAN interface
allows the connection with a PC with a Windows PC Software.
FIG. 5
Earthing!
Power supply
interface
A PC with a
Windows PC Software
P u t t i n g
MINIMUM WIRING
MAXIMUM WIRING
Programmable
Programmable
Relays
TTL Inputs/Outputs
TTL1
REL1
TTL2
REL2
TTL3
TTL4
t h e s y s t e m i n t o
Analogue Audio Left Input
Analogue Audio Right Input
AES Input
Analogue Audio Left Input
Analogue Audio Right Input
AES Input
o p e r a t i o n
P A GE 1 9