Safety; Introduction; General Safety Requirements - AVT MAGIC AE1 DAB+ Go Hardware Manual

S A F E T Y

Introduction

The unit described has been designed to the latest technical parameters and
complies with all current national and international safety requirements. It
operates on a high level of reliability because of long-term experience in de-
velopment and constant and strict quality control in our company.
In case of normal operation the unit is safe.
However, some potential sources of danger for person, material and optimal
operation remain - especially if daily routine and technical errors coincide.
This manual therefore contains basic safety instructions that must be ob-
served during configuration and operation. It is essential that the user reads
this manual before the system is used and that a current version of the manual
is always kept close to the equipment.

General Safety Requirements

To keep the technically unavoidable residual risk as low as possible, it is ab-
solutely necessary to observe the following rules:
– Transport, storage and operation of the unit must be under the permissible
conditions only.
– Installation, configuration and disassembly must be carried out only by
trained personnel on the basis of the respective documentation.
– The unit must be operated by competent and authorised users only.
– The unit must be operated in good working order only.
– Any conversions or alterations to the unit or to parts of the unit (including
software) must be carried out by trained personnel authorised by the man-
ufacturer.
Any conversions or alterations carried out by other persons lead to a com-
plete exemption of liability.
– Only qualified personnel is authorised to remove or override safety meas-
ures and to carry out the maintenance of the system.
– External software is used at one's one risk. Use of external software can af-
fect the operation of the system.
– Use only tested and virus-free data carriers.
S a f e t y
P A GE 1 1