Reading The Serial Number - EUCHNER EKS Manual

Electronic-key-system adapter with ethernet tcp/ip interface
Hide thumbs Also See for EKS:
Table of Contents

Advertisement

Manual EKS Electronic-Key Adapter Ethernet TCP/IP

8.3.3 Reading the serial number

The Electronic-Key read/write also has a unique 8-byte serial number that is permanently written to the memory
during the Electronic-Key production process. The serial number can therefore not be changed. This serial
number is used for secure distinction of every single Electronic-Key. It is necessary that all 8 bytes are
completely evaluated for secure distinction. The serial number is appended to the freely programmable memory.
The serial number can be read by entering the start address byte number 116 and the number of bytes 8 (see
chapter 8.3.2).
Command message
Reply message (message core, EKS → PC/control system, see Figure 10):
There is only one reply for this command:
 Ek (device addr.) (00
Description
0
1
2
3
4
5
6
Figure 9: Command message Read Electronic-Key status (message core)
Byte no.
Description
0
Number of message bytes
1
Command identification
2
3
4
5
6
Figure 10: Reply message Read Electronic-Key status - status (message core)
* Status number
Information!
The current status of the EKS Electronic-Key can be polled actively at any time using the command
identification Ek. The EKS device responds also with command identification Ek and the information on
whether an Electronic-Key is in place or not.
This status message is sent automatically by the EKS also without request via the command message,
as soon as the Electronic-Key is put in place or removed.
Page 30/34
(message core, PC/control system → EKS, see Figure 9):
, 00
) (00
)
hex
hex
hex
, 00
hex
01
:
EKS_KEY_IN
hex
02
:
EKS_KEY_OUT
hex
03
:
EKS_KEY_OTHER
hex
Subject to technical modifications
Contents
hexadecimal
07
45
k
6B
01
00
00
00
Contents
ASCII
hexadecimal
07
E
45
k
6B
01
XX
XX
*
decimal
7
69
107
1
0
0
0
decimal
7
69
107
1
X
X
2100420-03-05/19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents