Dip Switch Settings - EUCHNER EKS Manual

Manual EKS Electronic-Key Adapter Ethernet TCP/IP
4.4

DIP switch settings

The device has three DIP switches (S1, S2, S3).
DIP switch Function
S1.1 ... S1.4; write and read settings
S1
(4-fold)
S2.1 ... S2.8; setting of a fixed DNS name (required only for special applications)
S2
(8-fold)
S3.1 ...S3.4; settings for network connection and service
S3
(4-fold)
Information!
The settings are adopted only when the power supply is switched on.
4.4.1 DIP switch S1
DIP
Function
switch
S1.1 ON = write protection for Electronic-Key read/write
S1.2 No function
S1.3 No function
S1.4 No function
Information!
It is imperative that all DIP switches without a function (S1.2, S1.3 and S1.4) are set to OFF! In this
way problems with any functions added in the future will be avoided.
4.4.2 DIP switch S2
DNS LSB
name S2.1
EKS000 OFF
EKS001 ON
EKS002 OFF
EKS003 ON
... ...
EKS254 OFF
EKS255 ON
Page 14/34
S2.2 S2.3
OFF OFF
OFF OFF
ON OFF
ON OFF
... ...
ON ON
ON ON
Subject to technical modifications
S2.4 S2.5
OFF OFF
OFF OFF
OFF OFF
OFF OFF
... ...
ON ON
ON ON
Factory setting
OFF
OFF
OFF
OFF
S2.6 S2.7
OFF OFF
OFF OFF
OFF OFF
OFF OFF
... ...
ON ON
ON ON
2100420-03-05/19
MSB
S2.8
OFF
OFF
OFF
OFF
...
ON
ON