Table of Contents
Advertisement
Distributed by MicroDAQ.com, Ltd.
www.MicroDAQ.com
(603) 746-5524
TC-32 User's Guide
Functional Details
EXPANSION connector
Use the
EXPANSION
connector to connect the TC-32 to a TC-32-EXP expansion device (sold separately) for
applications that need additional analog/thermocouple input and digital I/O channels. A 40-pin expansion cable
is included with the TC-EXP-32.
Refer to
www.mccdaq.com
for TC-32-EXP product details.
Chassis ground connector
Provides a connection point (#6-32 screw) for chassis ground. Connect this to an external grounding source.
If the TC-32 is connected by USB or by a shielded Ethernet cable to grounded equipment, connecting to an
external grounding source is not needed since the USB/shielded Ethernet connection already grounds the TC-32
and a connected TC-32-EXP.
RESET button
Press and hold this button to restore the TC-32 to its factory default network settings. Refer to
Restoring factory
default network settings
on page 10
15
Advertisement
Table of Contents
Need help?
Do you have a question about the TC-32 and is the answer not in the manual?
Questions and answers