L E V E L I N G J A C K S A N D S L I D E O U T S Y S T E M S
10
90
BEORE OPERATING SLIDEOUT ROOMS:
•
Remove travel bars or slide-locks if equipped
•
Engage emergency brake
•
Place driver and front passenger seats in the most forward position and place
the seat-backs in the upright position, otherwise slideout may contact and
damage these seats
The motorhome must be level with the leveling jacks in the down position before
operating slideouts.
Before extending the slideout, check around and above the exterior of the motorhome to be
sure the slideout will not hit anything outside when it is fully extended; also check the interior
of your motorhome to be sure that slideout travel is free from obstructions before operation.
Extending the Slideout
After completing the exterior and interior inspections prior to slideout operation, next:
1. Put the motorhome transmission in PARK and:
a. Diesel Class A motorhome: apply PARKING BRAKE (engine must be running).
b. Gas Class A motorhome: apply PARKING BRAKE (engine must be OFF, and keys
removed from ignition).
c. Class C motorhome: apply PARKING BRAKE (engine must be OFF, and keys removed
from ignition).
CAUTION
CAUTION
C U S T O M E R C A R E
|
8 7 7 . 8 5 5 . 2 8 6 7
Need help?
Do you have a question about the Class C Series and is the answer not in the manual?
Questions and answers