Stabilizing Jacks; Slideout Systems - THOR Class C Series Owner's Manual

Table of Contents

2. Put the chassis transmission in the:

a. NEUTRAL position for rear mount diesel engine vehicles.

b. PARK position for all front mount gasoline or diesel engine vehicles.

3. Engage the motorhome PARKING BRAKE.

4. Start the chassis engine and keep it running while operating the leveling jack system.

5. Be sure all persons, pets, and property are clear of your motorhome while operating

the leveling system. If you are operating an automatic system with occupants inside the

motorhome, they must stay seated during the leveling process.

Stabilizing Jacks (if so equipped)

If your motorhome is equipped with power rear stabilizing jacks, the operating button is

located inside the motorhome by the stepwell. Be sure the rear power stabilizing jacks are

retracted in the up (travel) position before driving the motorhome.

Do not move or drive your motorhome with slideout(s) extended.

TMC motorhomes are equipped with hydraulic or electric slideout systems, or a combination

of both. Please refer to the slide mechanism manufacturer's owner's manual and follow their

safety, operation, and maintenance instructions. If you feel you are missing this information,

please contact your selling dealership, TMC Customer Care, or the slide mechanism

manufacturer for assistance. Or for your convenience, many of our suppliers make their

manuals available for download from their respective websites.

T H O R M O T O R C O A C H

DANGER

M A D E T O F I T

L E V E L I N G J A C K S A N D S L I D E O U T S Y S T E M S

NOTE: If you have an automatic leveling

system, do not allow people to walk around

when attempting to level the motorhome.

Doing so could disrupt the leveling jack's

sensing mechanism.

NOTE: Stabilizing jacks are not designed or

intended to be used to level the motorhome.

Table of Contents

Need help?

Do you have a question about the Class C Series and is the answer not in the manual?

Class a series