Advertisement
Configuring the VR1000 Using the WebUI
Logging,
Table 7: Logging configuration (continued)
continued
Ephemeris*
*This feature is only
available if you have a
"Raw" activation on the
receiver.
Corrections
High Speed
Duration
File Splitting
Filename
To stop logging, de-select the Enabled button and press Save
Settings.
log, the log file will become corrupted.
875-0422-10 Vector VR1000 QRG Rev A1
March 29, 2019
Field
Log raw GNSS ephemeris messages at 0.2Hz,
1Hz, 10Hz, or 20HZ.
Note: 10Hz and 20Hz are only available with
activations (some kits may come with 10Hz
or 20Hz included).
Log the correction messages coming into
the receiver.
High Speed logs diagnostic data.
Note: Selecting that dropdown option
forces the GGA, "corrections" and
"ephemeris" options on.
Set the period for which you wish to record
data.
Automatically closes a file and restarts a
new file after a period of time.
Use file splitting to decrease file sizes or to
prevent the loss of a file resulting in the loss
of all data.
Choose a filename.
All filenames automatically have an
appended date and timestamp.
If you power off the receiver without properly closing a
, Continued
Description
Continued on next page
Page 29 of 36
Advertisement
