Advertisement
Configuring the VR1000 Using the WebUI
Heading menu,
Table 5: Heading Configurations (continued)
continued
CSEP
Note: Default settings can be changed to set the time constants to
smooth heading, Course-over-Ground (COG), and speed
measurements.
CAN
On the CAN configuration menu, turn ON/OFF CAN and select the
Configuration
baud rate (250 kbps, 500 kbps, or 1000 kbps).
875-0422-10 Vector VR1000 QRG Rev A1
March 29, 2019
Heading
Configuration
This is the antenna separation calculated by
the receiver. Ensure the CSEP value is within
0.02 of the MSEP value.
Note: If CSEP value is "0" the receiver is
unable to calculate the separation between
the primary and secondary antennas, and
you will not receive a valid heading.
, Continued
Description
Continued on next page
Page 23 of 36
Advertisement
