Advertisement
Configuring the VR1000 Using the WebUI
Logging,
Table 7: Logging configuration
continued
GPGGA
Position/Velocity
Observations*
*This feature is only
available if you have a
"Raw" activation on the
receiver.
Heading
875-0422-10 Vector VR1000 QRG Rev A1
March 29, 2019
Field
Turn on GGA message logging at 0.2Hz, 1Hz,
10Hz, or 20HZ.
Note: 10Hz and 20Hz are only available with
activations (some kits may come with 10Hz
or 20Hz included).
Log the position and velocity of the receiver
at 0.2Hz, 1Hz, 10Hz, or 20HZ.
Note: 10Hz and 20Hz are only available with
activations (some kits may come with 10Hz
or 20Hz included).
Log raw GNSS observations at 0.2Hz, 1Hz,
10Hz, or 20HZ.
Note: 10Hz and 20Hz are only available with
activations (some kits may come with 10Hz
or 20Hz included).
Heading logs the following messages:
• GPHDT
• GPHDM
• GPHDG
• HPR
• BIN3
, Continued
Description
Continued on next page
Page 28 of 36
Advertisement
