Advertisement
Configuring the VR1000 Using the WebUI
Serial
Use Serial to configure the baud rate of each serial port (PortA and
PortB and turn off/on specific NMEA 0183 messages and
proprietary Hemisphere BIN messages.
You can also change Port B from RS232 to RS422 and RS422 to
RS232 reciprocally.
Configure the Serial Port and click Output.
875-0422-10 Vector VR1000 QRG Rev A1
March 29, 2019
, Continued
Continued on next page
Page 24 of 36
Advertisement
