Advertisement
Configuring the VR1000 Using the WebUI
System,
After Bluetooth is disabled, the filesystem displays. Any log files
continued
stored on the receiver will be available for download.
To upgrade firmware, click Choose File, select the GNSS or carrier
board firmware, and press "Upload."
Settings
A pop-up dialog box displays prompting for username and password.
Type the UserName: admin and the password: Hemi3384.
You can configure the following using the VR1000 WebUI:
• Heading
• CAN
• Serial
• Radio
• Ethernet
• Logging
• Ntrip
• Atlas
• Miscellaneous
875-0422-10 Vector VR1000 QRG Rev A1
March 29, 2019
, Continued
Continued on next page
Page 18 of 36
Advertisement
