AT&T Merlin 206 Manual page 5

Set Rings Before Answering Transferred calls
Procedure: Set the number of rings the Classic Mail will wait before re-connecting with a caller after a transfer. The
caller may then leave a message and/or transfer to another intercom.
Note: See page 10 of the Classic Mail Design Package for this information. The default value is four
rings.
Fast Track: 6 - 2
Block Lines for Off-Site Message Alert
Reference: System Reference Guide Pg. 97
Procedure: If required, block individual lines from performing Off-Site Message Alert.
Note:
See page 7 of the Classic Mail Design Package for this information. The Classic Mail will only select
unblocked lines when performing Off-Site Message Alert functions.
Fast Track: 6 - 3
Set the Call Transfer Type
Reference: System Reference Guide Pg. 101
Procedure: Select either direct or annouced transfer method.
Note:
See page 10 of the Classic Mail Design Package for this information. The announce method is
mandatory for Merlin systems without the transfer feature.
Fast Track: 6 - 7
Rings Before Answering Incoming Calls
Reference: System Reference Guide Pg. 92 - 94
Set the rings before the Classic Mail answers incoming calls in either day operation, night
Procedure:
operation or by individual line as required.
Note: See page 10 of the Classic Mail Design Package for this information. Setting the Rings-Before-
Answer for an individual line overrides the Business Hour Schedule for that line.
Fast Track: 5 - 1
Business Hour Schedule
Reference: System Reference Guide Pg. 80
Procedure: Define the opening and closing time for Monday through Sunday.
Note: See page 10 of the Classic Mail Design Package for the Business Hour Schedule. Time is entered
using a two-number format, two numbers for the hour and two numbers for the minute. The
A/MP/M designation is then prompted "...press one for AM or 2 for PM."
Fast Track: 5 - 2
Classic Mail Installation Package - Page 5