AT&T Merlin 206 Manual page 21

4 .
Message Waiting Lights
Program each Voice Terminal port used for Telephone Emulation to use the Attendant's Template (See
the diagram on the next page for the Attendant's Template). While in the Admin mode, enter the
intercom number for a Telephone Emulation port and dial *10410. This will set the port to the default
button assignments which enables message waiting. Repeat this for each Voice Terminal port used for
Telephone Emulation.
Note: This must be done or the Classic Mail will not function properly.
5 . Check all vacant Merlin Tel.Co. ports
Move an existing Public Network connection to a vacant Tel.Co.. port.
Verify that the port is good by calling the telephone number for that line. If a working connection is
made the port is operational.
Repeat the previous steps for each vacant line port.
If all ports are good and have proceed with installation.
Note:
If any line port is not functioning, notify the Merlin system owner before proceeding with the
installation.
Classic Mail Installation Package - Page 21