Set The Date And Time; Set The Access Code - AT&T Merlin 206 Manual

Verify the Results of Self-Initialization
Reference: System Reference Guide Pg. 35
Compare the Control Unit type, Control Unit software and in-service line assignments to the
Procedure:
information prompted by the Classic Mail after system initialization.
The Self-Initialization process takes about five minutes. See pages 7 and 8 of the Classic Mail Design
Note:
Package for confirming data.

Set the Date and Time

Reference: System Reference Guide Pg. 36
Procedure: Set the system clock to the correct date and local time.
Note: The date and time entries are made using a two-number format. Two numbers each for month, day
and year. Two numbers each for hour and minute. The AM/PM designation is prompted "...press 1
for AM or 2 for PM."
Initialize the Administrator's Mailbox
Reference: System Reference Guide Pg. 36
Procedure: Enter the administrator's new password, directory name recording and spelling.
Note:
Write down the Administrator's mailbox number and password on page 8 of the Classic Mail
Design Package.
Unlock the Assigned Mailboxes
Reference: System Reference Guide Pg. 68
Procedure: Unlock all mailboxes that are assigned to owners including those used by call routing.
Note: See page 16 and 17 of the Classic Mail Design Package. Do not unlock mailboxes that are unassigned.
Fast Track: 7

Set the Access Code

Reference: System Reference Guide Pg. 96
Procedure: If required, set the Classic Mail access code to be a different single digit on the telephone.
Note:
See page 10 of the Classic Mail Design package for this information. The default is the star key. Before
changing the Access Code, confirm that the star key causes undesirable affects such as last-number-redial.
Fast Track: 6 - 1
Classic Mail Installation Package - Page 4