Change Bluetooth Device Name; Pair Gxv3380 With A Bluetooth Device - Grandstream Networks GXV3380 User Manual

Change Bluetooth Device Name

The GXV3380 uses "GXV3380XXXXXX" as Bluetooth device name by default where "XXXXXX" are the
last 6 digits of the phone's MAC address plus 2, for e.g. If the phone's last 6 digits of MAC address is
D33B4C, the Bluetooth's name would be GXV3380_D33B4E.The device name will be visible to other
devices when connecting them. Follow the steps below to change the name:
1. Go to GXV3380's Settings→Basic→Bluetooth
2. Turn on Bluetooth.
3. Select Additional settings.
4. Press "Device name".
5. Enter a name and tap on "Rename".

Pair GXV3380 with a Bluetooth Device

Before connecting GXV3380 with other Bluetooth device, users must pair them first. They will stay paired
afterwards unless they are unpaired.
1. Go to GXV3380's Settings → Basic → Bluetooth
2. Turn on Bluetooth.
3. Tap Additional settings and select "Visible to nearby Bluetooth devices" to make the GXV3380 phone
visible to all nearby Bluetooth devices.
4. The GXV3380 scans and displays the IDs of all available Bluetooth devices in range. If the device you
would like to pair with does not show up in the list (available devices), ensure that the other device is
turned on and set to be discoverable.
5. If the GXV3380 stops scanning before the other device is ready, press
6. Once the Bluetooth device shows up in the result, tap on it to start pairing. Confirm the passkey in the
prompted message (if any). Or if passcode is required, please refer to the device's documentation or
other procedures to obtain the passcode.
GXV3380 User Guide
Version 1.0.1.5
button to scan again.
P a g e | 125