Instructions For Use - Genie Z-45/25 Operator's Manual

Cribbing Instructions

Instructions For Use

1 Make sure you are properly trained in the use of
aerial lifts on cribbing, using the information
provided in this manual.
2 Make sure the Genie aerial lift has been
modified with a lock-out switch that disables the
drive function. This switch will be located on the
ground control panel and labeled with a patch
(part number 97549). NOTE: If the machine
does not have a lock-out switch, contact your
Genie dealer to order a switch installation kit.
3 Place the cribbing on a surface that complies
with the requirements of this manual and the
illustration below.
4 With the machine in the stowed position, drive
onto the cribbing. The base of the machine
must be level on the cribbing.
6° (10%) max.
4
5 Move the drive disable switch to lock out the
drive function.
6 Operate the machine lift function according to
the instructions in the appropriate operator's
manual.
First Edition • First Printing
Part No. 82943