Placing Originals; Placing Originals On The Original Glass - Oki ES9466 Manual

Placing Originals

0.
 Placing originals on the original glass
The original glass can be used for originals such as OHP films or tracing paper, as well as plain paper, which cannot be
loaded in the ADF.
Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with force.
Breaking the glass could injure you.
Raise the Original Cover or the ADF.
1
Raise it 60 degrees or more so that the size of the original can be detected correctly.
Place the original with its face down on the original glass and align it with the left rear corner of
2
the glass.
When you place original in a landscape direction
When you scan highly transparent original
When you scan highly transparent original such as OHP films or tracing paper, place a blank sheet, which is the
same size as the original or larger, over the original.
Lower the Original Cover or the ADF carefully.
3
When it is being closed, the scanner lamp flashes to detect the original size.

40 Placing Originals