Hunter Hydrawise HC Quick Start Manual page 6

Planning
4. Cable (shielded direct-burial cable must be used): Two-wire cable is required. The cable gauge is determined
by the total length of cable between the controller and the flow meter. The cable should consist of 2 dedicated
wires and must not be in the same conduit or cable bunch as the solenoid wires. Do not share the common wire
of the solenoids with the common of the sensors.
Flow Meter Cable Length Chart
WIRE SIZE
Gauge
20
18
6
MAX LENGTH
Feet
240
1,000
Note: Shielded direct-burial cable is commonly
available. Manufacturers include Paige Electric and
Regency Wire.