Hc Flow Meters - Hunter Hydrawise HC Quick Start Manual

HC Flow Meters

The flow meter consists of two parts:
1. Flow meter body: The flow meter body contains an analog dial for manual readings
as follows. Your flow meter will have 3 wires protruding from the body. The wires
need to be connected to the sensor inputs on the controller for readings in the
software application. In all models, only 2 wires (blue and white) are used.
2. Adapter: Each flow meter has an adapter to allow connection to your irrigation system.
Note: The flow meter displays U.S. gallons.
If so desired, you can change the unit of
measure in the app to liters.
4
DIAL MARKING MEASUREMENT UNIT
X0.01 0.1 gallon
X1 1 gallon
X10 10 gallons
X100 100 gallons