Advertisement
Figure
43
- Rieilo
Electrode
Setting
Figure
44
-Rieilo
Turbulator
Setting
IMPORTANT: TH!S D_MENSIONS MUST BE OBSERVED AND VERIFIED
b 5/32 '°-,4ram
i3/64 '_
5ram
5164 '_to 7/64" or 2 tO2: 5ram .......
! I I L 10
Turbulator
Setting
A.
Loosen nut (1) turn SCREW (2) until INDEX MARKER
(3) is aligned with correct index number as per
Burner Settings Table.
B. Tighten RETAINING NUT (1).
NOTE: Zero and four are scale indicators only.
From left to right, first line is 4 and last line 0. On some
models, scale indicators are 0 and 3.
Advertisement
