Related Manuals for netvox R712
Summary of Contents for netvox R712
- Page 1 R712 Model： Wireless Outdoor Temperature And Humidity Sensor Outdoor Temperature and Humidity Sensor User Manual...
-
Page 2: Table Of Contents
Table of Content 1. Introduction................................2 2. Appearance................................. 3 3. Main Features................................4 4.Set up Instruction.................................4 4.1 Power on and Turn on / off..........................4 4.2 Join Into Lora Network............................ 4 4.3 Function Key..............................4 4.4 Data Report...............................5 5. Restore to Factory Setting............................5 6. -
Page 3: Introduction
R712 is a long-range wireless temperature and humidity device based on the LoRaWAN open protocol (Class A). The R712 is mainly used to detect the temperature and humidity in outdoor air, and also carrying a waterproof housing. It collects data over LoRa network and sends it to devices to be shown, fully compatible with LoRaWAN protocol. -
Page 4: Appearance
2. Appearance Temperature / Himidity Sensor Probe LED Indicator Function Key Battery Cover Waterproof shell appearance... -
Page 5: Main Features
The network operation is as following: (1) If R712 had never joined any network, turn on the device; it will search an available LoRa network to join. The green indicator will stay on for 5 seconds to show it joins into the network, otherwise, the green indicator will be off. -
Page 6: Data Report
1. Press and hold function key for 5 seconds till the green indicator flashes and then release; LED flashes quickly 20 times. 2. R712 will stay off after restoring to factory setting. Press function key to turn on R712 and to join a new LoRa network. -
Page 7: Low Voltage Alarming
If it’s at (B) status, to prevent this unwanted power consumption, we recommend that users remove the batteries to power off the device. 7. Low Voltage Alarming The operating voltage threshold is 2.4V. If the voltage is lower than 2.4V, R712 will send a low-power report to the Lora network. 8. Important Maintenance Instruction ... - Page 8 This device complies with Part 15 of the FCC Rules. Operation is to the following two conditions:(1)this device may not cause harmful interference and (2)this device must accept any interference received, including interference that may cause undesired operation. FCC RF Radiation Exposure Statement: 1This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Need help?
Do you have a question about the R712 and is the answer not in the manual?
Questions and answers