netvox R718MA User Manual
  1. Manuals
  2. Brands
  3. netvox Manuals
  4. Accessories
  5. R718MA
  6. User manual

netvox R718MA User Manual

Wireless asset sensor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
R718MA
Model：
Wireless Asset Sensor
Wireless Asset Sensor
R718MA
User Manual

Advertisement

Table of Contents
loading

Related Manuals for netvox R718MA

Summary of Contents for netvox R718MA

  • Page 1 R718MA Model： Wireless Asset Sensor Wireless Asset Sensor R718MA User Manual...

  • Page 2: Table Of Contents

    Table of Content 1. Introduction ................................2 2. Appearance ................................3 3. Main Features ................................3 4.Set up Instruction ..............................3 4.1 Power on and Turn on / off ..........................3 4.2 Join Into LoRa Network ..........................4 4.3 Function Key ..............................4 4.4 Data Report ..............................

  • Page 3: Introduction

    Introduction This device is a simple positioning function (which can detect the position status of the device), and periodically reports RSSI and SNR. The information is processed by the gateway, and the location range of the device is detected according to the reported RSSI and SNR information. The device applies SX1276 wireless communication module.

  • Page 4: Appearance

    2. Appearance Fig.1 R718MA Appearance 3. Main Features  Compatible with LoRaWAN protocol.  Powered by 2 x ER14505 3.6V Lithium AA battery  Easy set up and installation  Simple location range detection 4.Set up Instruction 4.1 Power on and Turn on / off (1) Power on: Insert batteries: open the battery cover;...

  • Page 5: Join Into Lora Network

    The green indicator will stay on for 5 seconds to show it joins into the network, otherwise, the green indicator will be off. (2) If R718MA had been joined into a LoRa network, remove and insert the batteries; it will repeat step (1).

  • Page 6: Data Report

    4.4 Data Report When the device is turned on, it will immediately send a version package. Data will be reported once per hour by default setting. Maximum time: 3600s Minimum time: 3600s (Detect the current voltage value every 3600s by default setting) Default reportchange: Battery ---- 0x01 (0.1V) Note:...
  • Page 7 Example#2 battery voltage Reportable Change = 0.1V based on MinTime = 15 Minutes, MaxTime= 1 Hour, Someone pushes the button, device wakes up MaxTime and collects data 3.5V REPORTS 3.5V sleeping sleeping 2H 10 1H 10 1H 25 1H 40 M 1H 55 Wakes Wakes...

  • Page 8: Restore To Factory Setting

    (B) When it is not in the network → R718MA will enter sleeping mode and wake up every 15 seconds to search a network to join in the first two minutes. After two minutes, it will wake up every 15 minutes to request to join the network.

  • Page 9: Important Maintenance Instruction

    9. Important Maintenance Instruction Your device is a product of superior design and craftsmanship and should be used with care. The following suggestions will help you use the warranty service effectively. • Keep the equipment dry. Rain, moisture, and various liquids or moisture may contain minerals that can corrode electronic circuits.

Table of Contents