Cal-Royal CRCODE-204 Instruction And Programming Manual page 3

Introduction
Parts
Mark and Drill Door
Change Door Handing
CRCODE-204 Exploded View
CRCODE-205 Exploded View
Mounting Post Location
Mounting Post Installation
Lock Installation
Change Access Code
Access Code Recovery
Introduction
1. This is a mechanical lock. It does not need a power supply.
2. There are 12 buttons that can be coded: 1 to 0, X and Z. The Y button is only used for setting
the new code. The C button is to clear the buttons if the wrong code is entered.
3. The numbers in the code can be interchanged and does not need to be typed in order.
Password combinations can be from 1-12 digits but 4 to 6 digit codes is suggested for security
purposes.
4.The lock is suitable for door thickness 1-3/4" to 2". Choose the appropriate length of
screws according to the door thickness. If the door thickness is out of range, please contact
dealer to get special parts.
12 buttons can be coded:
1-0, X and Z
The Y button is only used
to set new codes, it can
not be coded.
TABLE OF CONTENTS
n be coded:
only used
s, it can
The C button is used as
a clear button when the
wrong code is entered. It
can not be coded.
1
Page
1
2
3
3
4
4
5
5
6
7-8
8
6605 Flotilla St., Commerce, CA 90040
Tel (323) 888-6601 Fax (323) 888-6699
www.cal-royal.com