5. LABELS AND CORRESPONDING FUNCTIONS
OF THE REMOTE CONTROLLER
The illustrations in this operating manual correspond to the
remote control format BRC1E type. Refer to Figure 1.
1.
Operation Mode Selector Button
•
Used to change the mode.
2.
Fan Speed Control Button
•
Used to change the fan control.
3.
Menu/OK Button
•
Used to indicate the main menu (For details of the main
menu, see the operations manual.
•
Used to enter the item selected.
Main Menu
Air Flow Direction
Ventilation
Schedule
Off Timer
Celsius/Fahrenheit
Maintenance Information
Configuration
Current Settings
Clock & Calendar
Daylight Saving Time
Language
*Depending on connected model
6
Figure 1
4.
Up Button
•
Used to raise the setpoint temperature.
•
The previous menus items will be highlighted. (The
highlighted items will be scrolled continuously when the
button is pressed continuously.)
•
Used to change the selected item.
5.
Down Button
•
Used to lower the setpoint temperature.
•
Items below the currently selected item will be
highlighted.(The highlighted items will be scrolled
continuously when the button is pressed continuously.)
•
Used to change the selected item.
6.
Right Button
•
Used to highlight items to the right of the currently
selected item.
•
Display contents are changed to next screen per page.
7.
Left Button
•
Used to highlight items to the left of the currently selected
item.
•
Display contents are changed to previous screen per
page.
8.
On/Off Button
•
Press once to operate, and press once again to stop.
9.
Operation Lamp
•
Green lamp lights up during operation. The lamp will
blink if a malfunction occurs.
10. Cancel Button
•
Used to return to the previous screen.
•
Press and hold this button for 4 seconds or longer to
display service settings menu.
11. LCD (with backlight)
•
The backlight will illuminate for approximately 30
seconds by pressing any operation button.
NOTE: Operate the button while backlight is illuminated. When
one indoor unit is controlled by two remote controllers (main/
sub) only the first controller to be accessed by the user will
illuminate it's backlight.
6. OPERATION PROCEDURE
Read the operation manual that came with the remote
controller:
•
To protect the unit, turn on the main power switch 6
hours before operation.
•
If the main power supply is turned off during
operation, operation will restart automatically after the
power turns back on again.
English