Provision Settings - D-Link DVG-G5402SP User Manual

DVG-G5402SP User's Manual

2-3-6 Provision Settings

Provisioning is a function that automatically updates your DVG-G5402SP's VoIP configuration by using a
TFTP, FTP, or HTTP server located on the Internet. If you have access to such service, you will need to
know the URL or IP address of the Provisioning Server.
Note: Fill in the parameters needed by your VoIP Service Provider. Please check with your VoIP Service
Provider about the availability of these services.
MAINTENANCE → PROVISION SETTINGS
Enable Auto Provisioning: Check the box to start provisioning.
Provision Server Address: Enter the Provisioning Server's IP address or URL required by your VoIP
Service Provider.
Port: Enter the Provisioning Server's listening port.
Packet Format: Use the drop-down menu to choose the packet transmitting format required by your VoIP
Service Provider.
Connect Provision Server During Start Up: Check the box to connect to Provisioning Server when the
gateway is powered on or rebooted.
Connect Provision Server Periodically: Check the box to connect to Provisioning Server periodically.
Auto Provision Interval: Enter the time for auto provisioning.
Random Offset: Enter the offset of the time for auto provisioning.
Provision Retry Times: Enter the retry time if a provisioning attempt fails.
Retry Interval: Enter the interval for retrying.
Suspend Service: Check the box to stop VoIP call service.
Note: Contact your server provider if necessary.
D-Link Systems, Inc.
MAINTENANCE
63