Sony HDW-S280 Operation Manual page 76

Item Item name
number
812 AUDIO OUTPUT LEVEL
a) NAU FLG PB
823
Sub-item
1 CH1/CH2
2 CH3/CH4
824 ANALOG LINE OUTPUT
SELECT
826 AUDIO VOLUME SELECT
832 ANALOG AUDIO INPUT
MODE
833 CUE AUDIO INPUT
SELECT
834 AUDIO INPUT LEVEL
Sub-item
1 CH1
2 CH2
3 LINE LEVEL
835 CUE REC LEVEL ATT
836 DIGITAL AUDIO MUTING
IN FF/REW MODE
a) Not applicable in 24PsF/23.98PsF mode
76
Items in the Extended Setup Menu
Settings
Set the audio output level.
[+4 dB] 0 dB –3 dB –20 dB
Note
−20 dB is not displayed in the display window.
Controls the non-audio flag when the playback format is Betacam SX.
During Betacam SX playback, sets the non-audio flag of a digital audio output as
follows.
[OFF]: OFF (the data is audio)
ON: ON (the data is non-audio)
Notes
• During playback of analog tapes, the non-audio flag is OFF regardless of the setting
for this item.
• In the HDCAM format, the non-audio flag follows the setting for maintenance menu
item M372 during recording and in E-E mode. During playback, it follows the setting
recorded on the tape.
For details on the maintenance menu item M372, refer to the Maintenance Manual.
Select audio channels output from the AUDIO OUTPUT connectors on the rear panel.
[CH1/2]: Output the audio channels 1 and 2.
CH3/4: Output the audio channels 3 and 4.
Assign the audio channels to the REC LEVEL adjustment knobs and PB LEVEL
adjustment knobs on the front panel.
[CH1/2]: Assign the audio channels 1 and 2.
CH3/4: Assign the audio channels 3 and 4.
1(3)/2(4): Assign the audio channels 1/3 and 2/4.
REC4: Assign the audio channels 1 to 4 for recording.
PB4: Assign the audio channels 1 to 4 for playback.
Select the signal recorded on audio channels 3 and 4 when an analog audio input is
selected.
[OFF]: No recording
PARA: Recording channel 1 on channel 3, and channel 2 on channel 4
Select the digital audio channel recorded on cue channel.
OFF: No recording
CH1+2: Recording audio channels 1 and 2
CH3+4: Recording audio channels 3 and 4
[CH1]: Recording audio channel 1
CH2: Recording audio channel 2
Set the analog audio input.
[LINE]: line input
MIC: microphone input
Set the line input level.
[+4 dB] 0 dB –3 dB –20 dB
Set the recording level on the cue track.
0 dB [–3 dB] –6 dB –9 dB –12 dB
Select whether the playback sound is muted in fast forward or rewind mode if the
playback format is HDCAM or Betacam SX.
OFF: The playback sound is not muted.
[ON]: The playback sound is muted.